1 copyright ? 2010, everlight americas inc. all rights reserved. release date may 21 .20 13 . issue no: 1 rev. 1 www.everlightamericas.com smd ? b EAST16084AA0 features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono - color type. ? pb - free . ? the product itself will remain within rohs compliant version. ? compliance with eu reach ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). description ? the smd led is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them id eal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use.
datasheet smd ? b EAST16084AA0 2 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com device selection guide chip materials emitted color resin color algainp b rilliant orange water clear absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @1khz) i fp 60 ma power dissipation pd 60 mw operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 electrostatic discharge esd hbm 2000 v soldering temperature t sol reflow soldering : 260 for 30 sec. hand soldering : 350 for 3 sec. electro - optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv 11.5 ----- 28.5 mcd i f = 5 ma viewing angle 2 1/2 ----- 120 ----- deg i f = 5 ma peak wavelength p ----- 611 ----- nm i f = 5 ma dominant wavelength d 600 .5 ----- 612 .5 nm i f = 5 ma spectrum radiation bandwidth ----- 17 ----- nm i f = 5 ma forward voltage v f 1.7 0 ----- 2. 20 v i f = 5 ma reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of luminous intensity: 11% 2 . to lerance of dominant wavelength : 1nm 3. to lerance of forward voltage 0.05 v
datasheet smd ? b EAST16084AA0 3 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com bin range of luminous intensity bin code min. max. unit condition l1 11.5 14.5 mcd i f = 5 ma l2 14.5 18.0 m1 18.0 22.5 m2 22.5 28.5 note: tolerance of luminous intensity: 11% bin range of dominant wavelength group bin min. max. unit condition a d8 600.5 603.5 nm i f = 5 ma d9 603.5 606.5 d10 606.5 609.5 d11 609.5 612.5 notes: to lerance of dominant wavelength : 1nm bin range of forward voltage group bin min. max. unit condition v 19 1.70 1.80 v i f = 5 ma 20 1.80 1.90 21 1.90 2.00 22 2.00 2.10 23 2.10 2.20 notes: to lerance of forward voltage 0. 05 v
datasheet smd ? b EAST16084AA0 4 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com typical electro - optical characteristics curves
datasheet smd ? b EAST16084AA0 5 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com package dimension note: tolerances unless mentioned 0.1mm. unit = mm
datasheet smd ? b EAST16084AA0 6 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com moisture resistant packing materials label explanation ? cat: luminous intensity rank ? hue: dom.wavelength rank ? ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet smd ? b EAST16084AA0 7 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com carrier tape dimensions: loaded quantity 3 000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? b EAST16084AA0 8 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he l eds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 35 0 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damag e of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repair ing. pre-heating 150~200c 60~120sec. 3c/sec.max. above 217c 60~150sec. 260c max. 10sec. max. 6c/sec.max. above255c 30sec.max.
datasheet smd ? b EAST16084AA0 9 copyright ? 2010, everlight all rights reserved. release date : may 21 .20 13 . issue no: 1 rev. 1 www.everlight.com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight a mericas before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document.
|
